For best results, follow these simple steps when applying PROTECT® PROLONG Roof Coating.
1. Prepare the Product
Before starting, stir thoroughly using a drill mixer or by hand to ensure the coating is fully blended.
2. Clean the Surface
Use a degreaser to thoroughly clean the surface. The surface must be dry and free of dust, grease, and contaminants before application.
3. Reinforce Seams & Joints
Embed a 4"–12" wide pre-cut strip of POL-E-FORCE fabric into the coating and shape it to the contours of:
Joints
Flashing seams
Corners
Use a paintbrush to form the fabric into place properly.
4. Apply the Coating
The coating can be applied using:
Airless spray equipment, or
Paint roller
For best results, use a 9" roller with a minimum ¾" nap.
5. Coverage Rate
Apply at a minimum rate of:
3.4 gallons per 100 sq. ft. (1.4 L / m²)
This coverage is typically achieved by applying 2–3 coats, depending on temperature and relative humidity.
6. Dry Time
Allow at least 12 hours of drying time between coats.
Key Benefits
✔ No primer or buffing required ✔ Easy DIY application with immediate results ✔ All-weather resistance from -45°C to 200°C ✔ Blocks solar gain and can reduce roof surface temperature by up to 30°C (54°F) ✔ Ideal for roof repair and restoration ✔ Made in USA ✔ 15-Year Warranty
